1. Maytag Atlantis Washer Parts
2. Maytag Atlantis Washer Manual Download

Maytag Atlantis, Norge, Performa by Maytag: Remove the cap and. The agitator and lift up. The newer washer agitator just pulls out, remove cap, if no bolt, just grab hold and lift up hard.picture. Inglis, Whirlpool, Kenmore direct drive washer.

Related Articles

• 1 Agitator vs. Impeller Washing Machines
• 2 Replace Dog Ears on a Washing Machine Agitator
• 3 Remove the Agitator on a Maytag Dependable Care Washer
• 4 Repair a Kenmore Washer That Won't Agitate

There are many parts to a washing machine that can fail, and many of those parts cannot be accessed from beneath the machine. There are gaskets and seals around the agitator shaft and inside the agitator that can only be replaced after the agitator is removed. Other repairs, such as replacing a tub bearing, drive block or wash tub, require removing the agitator before the real repairs can begin. Some agitator removals are a bit complicated, while others don’t require any tools at all.

Unplug your washing machine from the wall before you get started removing the agitator. Lift the lid on your washer to expose the agitator.

Pull the fabric soften dispenser from the top of the agitator. The dispenser is held to the agitator by friction or requires you to lift up on the small ring along the bottom of the dispenser before lifting it from the agitator.

Insert a flathead screwdriver along the edge of the agitator cap and the agitator. Twist the screwdriver to pop the cap from the top of the agitator. Reach inside the agitator to grab the plastic dust cap with your fingers and lift it from the agitator. Some agitators do not have caps, in which case you can safely skip this step.

Connect an 8- to 10-inch socket extension to a socket wrench. Attach a 1/2 inch or a 7/16 inch socket to the extension.

UpdateStar Free and UpdateStar Premium come with the same installer. UpdateStar includes such as English, German, French, Italian, Hungarian, Russian and. Download port royale 3 keygen crack.

Insert the socket into the agitator to remove the agitator bolt from inside the agitator. Reach your fingers beneath the agitator and lift it from the machine.

Things You Will Need

• Flathead screwdriver

• 8- to 10-inch socket extension

• Socket wrench

• 1/2-inch or a 7/16-inch socket

About the Author

Cecilia Harsch has been writing professionally since 2009. She writes mainly home improvement, health and travel articles for various online publications. She has several years of experience in the home-improvement industry, focusing on gardening, and a background in group exercise instruction. Harsch received her Certified Nurses Assistant license in 2004. She attended Tarrant County College and studied English composition.

Choose Citation Style

Maytag Atlantis Washer Parts

Washer was working great until we moved, and now ever since then it makes that noise when it is in the agitates? We did not lay it on it's side, we used a dolly to move it to it's new location. I really need the help to fix! Everything else runs fine spins great and filled fine, just happens when it washes the clothes.

Is this a good question?

Comments:

had sears repair over today on same problem. ordered belt, cap and bearing going to run $200 to fix. its a maytag thats 8 yrs old and only used 2x per week so motor has a lot of life in it. i'm getting it fixed by sears.

priced new washers today on line and at Home Depot. with tax and delivery/set up running $400. a fix is a bargain. btw i called maytag and they wanted $400 to replace belt.

I had this problem, and chased it for a while. The drive pulley nut was too tight, causing this noise (my fault, I had been working on the machine). I backed off a quarter turn, and it's running fine now.

Can anyone tell me what will make a washing machine just stop aguteating and spinning all at once?

My Admiral mod#Atw4675yq1 is making a grinding like noise in Washington cycle.

Maytag Atlantis Washer Manual Download

Just started all of a sudden.