Metalworker Variable Speed Lathe Manual Pdf

 
  1. Variable Speed Metal Lathe

Variable Speed Control Dial—Controls the speed of the lathe spindle. Always turn this dial to the lowest setting before starting the lathe. Headstock—The housing that holds the spin- dle on the lathe. Headstock Spindle—Tapered at the inside end to accept the shank of a Morse Taper. #1 (MT#1) spur center and. Metalworker Variable Speed Lathe Manual Chuck Jaws It is important to note, however, that the Harbor Freight version is actually 8. The owner of this machine/tool is solely responsible for its safe use. This responsibility includes but is not limited to proper installation in a safe environment, personnel training and usage authorization, proper inspection and maintenance, manual availability and compre- hension, application of safety devices,.

12345678910111213141516171819202122232425262728293031323334353637383940
Twister speed lathe
VARIABLE SPEED WOOD LATHE
OWNER'S MANUAL
Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz
COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC., REVISED MARCH, 2013 (TS)
WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT
THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. (FOR MODELS MANUFACTURED SINCE 4/10)
#9397TS

Advertisement

Related Manuals for Woodstock SHOP FOX W1758

  • Lathe Woodstock SHOP FOX W1752 Owner's Manual
    Mini wood lathe (40 pages)
  • Lathe Woodstock M1020 Instruction Manual
    14 x 40 gear head lathe (80 pages)

Variable Speed Metal Lathe

Summary of Contents for Woodstock SHOP FOX W1758

  • Page 1 OWNER'S MANUAL Phone: (360) 734-3482 • Online Technical Support: tech-support@shopfox.biz COPYRIGHT © JUNE, 2007 BY WOODSTOCK INTERNATIONAL, INC., REVISED MARCH, 2013 (TS) WARNING: NO PORTION OF THIS MANUAL MAY BE REPRODUCED IN ANY SHAPE OR FORM WITHOUT THE WRITTEN APPROVAL OF WOODSTOCK INTERNATIONAL, INC. (FOR MODELS MANUFACTURED SINCE 4/10)
  • Page 2 This manual provides critical safety instructions on the proper setup, operation, maintenance, and service of this machine/tool. Save this document, refer to it often, and use it to instruct other operators. Failure to read, understand and follow the instructions in this manual may result in fire or serious personal injury—including amputation, electrocution, or death.
  • Page 3: Table Of Contents

    Contents INTRODUCTION ........2 ACCESSORIES ........26 Woodstock Technical Support ....2 Wood Lathe Accessories ....... 26 SAFETY ..........6 MAINTENANCE ........27 Standard Machinery Safety Instructions ..6 General .......... 27 Additional Safety for Wood Lathes .... 8 Cleaning ......... 27 Lathe Bed ........
  • Page 4: Introduction

    Woodstock International, Inc. is committed to customer satisfaction. Our intent with this manual is to include the basic information for safety, setup, operation, maintenance, and service of this product.
  • Page 5 W1758 Owner's Manual (Mfg. Since 4/10) MODEL W1758 SHOP FOX 16' X 46' WOOD LATHE WITH STAND AND DRO ® Product Dimensions Weight......................287 lbs. Width (side-to-side) x Depth (front-to-back) x Height........72-1/2 x 19 x 48 in. Footprint (Length x Width)................. 54 x 13-3/4 in. Shipping Dimensions Carton #1 Type.....................
  • Page 6 W1758 Owner's Manual (Mfg. Since 4/10) Motors Main Type................. TEFC Capacitor-Start Induction Horsepower....................2 HP Phase....................Single-Phase Amps......................14A Speed....................1725 RPM Power Transfer ................... V-Belt Drive Bearings............... Shielded & Permanently Lubricated Main Specifications Operation Information Swing Over Bed................... 16 in. Dist Between Centers..................
  • Page 7: Controls And Features

    W1758 Owner's Manual (Mfg. Since 4/10) Controls and Features A. Motor Quill Locking Lever B. Digital Readout K. Quill Handwheel C. Spindle L. Lathe Bed D. Spur Center M. Tool Rest Extension Locking Lever E. Speed Control Lever N. Tool Rest Base Locking Lever F.
  • Page 8: Safety

    W1758 Owner's Manual (Mfg. Since 4/10) SAFETY SAFETY For Your Own Safety, Read Manual Before Operating Machine The purpose of safety symbols is to attract your attention to possible hazardous conditions. This manual uses a series of symbols and signal words intended to convey the level of importance of the safety messages.
  • Page 9 INTENDED USAGE. Only use machine for keep machine in good working condition. A its intended purpose and never make machine that is improperly maintained could modifications not approved by Woodstock. malfunction, leading to serious personal injury Modifying machine or using it differently or death.
  • Page 10: Additional Safety For Wood Lathes

    W1758 Owner's Manual (Mfg. Since 4/10) MAIN INJURY HAZARDS: Death or crushing injury from getting entangled in rotating spindle or workpiece; death, blindness, or broken bones from being struck by a workpiece that breaks apart or comes loose during rotation, turning tool kickback, or flying wood chips. To minimize your risk of these hazards, always heed the following warning information: INTEGRITY OF STOCK.
  • Page 11: Electrical

    W1758 Owner's Manual (Mfg. Since 4/10) ELECTRICAL The machine must be properly set up before it is safe to operate. DO NOT connect this machine to the power source until instructed to do so in the 'Test Run' portion of this manual. 110V Operation The Model W1758 is wired for 110V operation.
  • Page 12: Setup

    W1758 Owner's Manual (Mfg. Since 4/10) SETUP Unpacking This machine has been carefully packaged for safe trans- portation. If you notice the machine has been damaged during shipping, please contact your authorized Shop Fox dealer immediately. Inventory The following is a description of the main components shipped with the Model W1758.
  • Page 13: Machine Placement

    W1758 Owner's Manual (Mfg. Since 4/10) Machine Placement Cleaning Machine • Floor Load: This lathe distributes a heavy The table and other unpainted parts of your load in a small footprint. Some residential machine type are coated with a waxy grease floors may require additional bracing to that protects them from corrosion during ship- support both machine and operator.
  • Page 14: Mounting To Shop Floor

    W1758 Owner's Manual (Mfg. Since 4/10) Mounting to Shop Floor Although not required, we recommend that you mount your new machine to the floor. Because this is an optional step and floor materials may vary, floor mounting hard- ware is not included. Generally, you can either bolt your machine to the floor or mount it on machine feet.
  • Page 15 W1758 Owner's Manual (Mfg. Since 4/10) 3. Using the 6mm hex wrench, secure the lathe to the legs with the eight cap screws and lock washers, as shown in Figure 8. 4. Install the handle into the tool rest, as shown in Figure 9.
  • Page 16: Test Run

    Test Run W1758 Owner's Manual (Mfg. Since 4/10) Test Run Once the assembly is complete, test run your machine to Tie back long hair, roll make sure it runs properly and is ready for regular opera- up long sleeves, and tion.
  • Page 17: Operations

    W1758 Owner's Manual (Mfg. Since 4/10) OPERATIONS General This lathe will perform many types of operations that are beyond the scope of this manual. Many of these operations can be dangerous or deadly if performed incorrectly. The instructions in this section are written with the under- standing that the operator has the necessary knowledge and skills to operate this machine.
  • Page 18: Adjusting Headstock

    W1758 Owner's Manual (Mfg. Since 4/10) Adjusting Headstock The Model W1758 headstock can be positioned anywhere along the bed and swiveled 360°. To position the headstock along the length of the lathe bed, do these steps: 1. DISCONNECT THE LATHE FROM POWER! 2.
  • Page 19: Adjusting Tailstock

    W1758 Owner's Manual (Mfg. Since 4/10) Adjusting Tailstock The tailstock is equipped with a cam-action clamping sys- tem to secure it to the lathe bed. When the locking lever is tightened, a locking plate lifts up underneath the bed and secures the tailstock in place. To position the tailstock along the length of the bed, do these steps: 1.
  • Page 20: Installing/removing Headstock Center

    Headstock Center W1758 Owner's Manual (Mfg. Since 4/10) Installing/Removing Headstock Center Before beginning any turning opera- tion, make sure the headstock The included spur center installs into the headstock spin- and tailstock centers are properly dle with an MT#2 tapered fit. aligned.
  • Page 21: Installing/removing Tailstock Center

    Tailstock Center W1758 Owner's Manual (Mfg. Since 4/10) Installing/Removing Quill Locking Lever Tailstock Center The included live center installs into the tailstock quill with an MT#2 tapered fit. To install the tailstock live center, do these steps: Move the tailstock to a safe working distance away Quill from the tool rest and headstock.
  • Page 22: Installing/removing Faceplate

    Installing Faceplate W1758 Owner's Manual (Mfg. Since 4/10) Installing/Removing Faceplate The faceplate is used for removing material from the face of the workpiece, such as in hollowing operations. The faceplate can be installed only if the center has been removed from the headstock spindle. To install the faceplate onto the spindle, do these steps: DISCONNECT THE LATHE FROM POWER!
  • Page 23: Selecting Turning Tools

    W1758 Owner's Manual (Mfg. Since 4/10) Selecting Turning Tools Lathe chisels come in a variety of shapes and sizes, and usually fall into five major categories. See Figures 22–25 for some examples. Gouges: Mainly used for rough cutting, detail cutting, and cove profiles.
  • Page 24: Spindle Turning

    Spindle Turning W1758 Owner's Manual (Mfg. Since 4/10) Spindle Turning Spindle turning is the operation performed when a workpiece is mounted between the headstock and tailstock centers (see Figure 26). Before beginning any turning operation, make sure the headstock and tailstock centers are properly aligned.
  • Page 25 Tool Rest Height W1758 Owner's Manual (Mfg. Since 4/10) 8. Install the live center into the tailstock quill, and lock the quill in place with the quill locking lever Workpiece (refer to Installing Tailstock Center on Page 19 for ' instructions).
  • Page 26: Faceplate Turning

    Faceplate Turning W1758 Owner's Manual (Mfg. Since 4/10) Faceplate Turning Faceplate turning is when a workpiece is mounted to the faceplate that, in turn, is secured to the headstock spin- dle. This type of turning is usually done with open-faced workpieces like bowls or plates (see Figure 30).
  • Page 27: Outboard Turning

    W1758 Owner's Manual (Mfg. Since 4/10) Outboard Turning Outboard turning is a variation of faceplate turning and is usually done when stock diameter is greater than 12'. For the size of the Model W1758 and its minimum turn- ing speed, we recommend not exceeding a maximum workpiece diameter of 17'.
  • Page 28: Accessories

    Dealer. If you do not have a dealer in your area, these products are also available through online deal- ers. Please call or e-mail Woodstock International Inc. Customer Service to get a current listing of deal- ers at: 1-800-545-8420 or at sales@woodstockint.com.
  • Page 29: Maintenance

    W1758 Owner's Manual (Mfg. Since 4/10) MAINTENANCE General Regular periodic maintenance on your machine will ensure its optimum performance. Make a habit of inspecting your machine each time you use it. Check for the following conditions and repair or replace when necessary: •...
  • Page 30: Service

    If you require additional machine service not included in this section, please contact Woodstock International Technical Support at (360) 734-3482 or send e-mail to: tech-support@shopfox.biz. MAKE SURE that your machine is Aligning Headstock &...
  • Page 31: Electrical Components & Wiring Diagram

    W1758 Owner's Manual (Mfg. Since 4/10) Electrical Components & Wiring Diagram 110 VAC NEMA 5-15 Plug (As Recommended) Ground Neutral Paddle Switch Digital Readout Motor Capacitor 100MFD 250VAC Spindle Speed Sensor -29-...
  • Page 32: Troubleshooting

    Troubleshooting W1758 Owner's Manual (Mfg. Since 4/10) Troubleshooting This section covers the most common problems and corrections with this type of machine. WARNING! DO NOT make any adjustments until power is disconnected and moving parts have come to a complete stop! Motor &...
  • Page 33: Lathe Operation

    W1758 Owner's Manual (Mfg. Since 4/10) Lathe Operation PROBLEM POSSIBLE CAUSE CORRECTIVE ACTION Bad surface finish. 1. Wrong spindle speed. 1. Use trail-and-error to find better spindle speed. 2. Dull chisel or wrong chisel being 2. Sharpen chisel or try a different chisel. used for operation.
  • Page 34: Parts

    W1758 Owner's Manual (Mfg. Since 4/10) PARTS -32-...
  • Page 35: Parts List

    W1758 Owner's Manual (Mfg. Since 4/10) Parts List PART # DESCRIPTION PART # DESCRIPTION XPS05M PHLP HD SCR M5-.8 x 8 XPR58M EXT RETAINING RING 24MM X1758102 MOTOR COVER X1758141 SPEED CHANGE LABEL XPB26M HEX BOLT M8-1.25 X 30 X1758142 SPEED CONTROL LEVER ASSY XPLW04M LOCK WASHER 8MM...
  • Page 36: Label Placement

    MUST maintain the original location and readability of all labels on this machine. If any label is removed or becomes unreadable, REPLACE that label before allowing the machine to enter service again. Contact Woodstock International, Inc. at (360) 734-3482 or www. shopfoxtools.com to order new labels.
  • Page 37: Warranty Registration

    W1758 Owner's Manual (Mfg. Since 4/10) Warranty Registration Name ___________________________________________________________________________________ Street __________________________________________________________________________________ City _________________________ State ___________________________Zip ________________________ Phone # ______________________ Email___________________________Invoice # ___________________ Model #_________Serial #______________Dealer Name__________________Purchase Date___________ The following information is given on a voluntary basis. It will be used for marketing purposes to help us develop better products and services.
  • Page 38 FOLD ALONG DOTTED LINE Place Stamp Here WOODSTOCK INTERNATIONAL INC. P.O. BOx 2309 BELLINGHAM, WA 98227-2309 FOLD ALONG DOTTED LINE TAPE ALONG EDGES--PLEASE DO NOT STAPLE...
  • Page 39 We do not warrant that machinery complies with the provisions of any law or acts. In no event shall Woodstock International, Inc.'s liability under this warranty exceed the purchase price paid for the product, and any legal actions brought against Woodstock International, Inc.
  • Page 40 High Quality Machines and Tools Woodstock International, Inc. carries thousands of products designed to meet the needs of today's woodworkers and metalworkers. Ask your dealer about these fine products:...